Kit Preview Kriegsmarine Supply/Repair Barge, Battlefleet Models BFM #726, Resin/PE/Machined brass, 1:700 Price 25$
 
Even the greatest celebrity needs supporting personnel to make their exploits possible. These people stay out of the limelight, but they are indispensable, be it for actors, singers, athletes or human hallstands. This is also valid for our hobby and its naval niche. For decades, manufacturers have tried to produce faithful reproductions of major combatants, with much less effort being spent on auxiliaries.
 
Battlefleet Models has a heart for the auxiliary fleet, supplying us with high-class miniatures of auxiliary vessels of all sorts, without which our dioramas would look rather naked.
 
This admittedly not rather sleek vessel is supposed to support larger Kriegsmarine units with provisions and workshop capacities.It was first designed and built be Cedric Chan for his 1:700 DKM Tirpitz diorama as to be seen at http://www.modelshipgallery.com/gallery/dio/dkm/tirpitz-700-cc/cc-index.html
It is not supposed to depict a certain vessel but rather a generic barge, as all navies used for similar purposes. As those vessels were also taken up from trade and converted individually, each of them was unique. Hence this kit may be used either straight from the box or as a base for a conversion.
As usual with this manufacturer, the kit was excellently packed, and all parts survived the trip from Colorado to Hesse, Germany. Lots of bubble wrap and shrink-wrap worked wonders – other manufacturers could improve in that respect.
The resin parts are cleanly and crisply made, equally crisply molded and cast with hardly any excess resin to trim off. Working with these parts should be trouble-free. The parts count being as low as it is, this kit should appeal to resin newbies as a positive first resin experience. The entire deck has a nice plank structure, which is helpful for conversions. There is a very nice winch at the bow. Some parts prone to damage or loss have been provided with spares, which is a ncie touch by the manufacturer. Apart from the resin parts, the kit contains two pieces of brass wire and a sufficient amount of PE railing from Tom´s Model Works.

The intructions start with a picture of Cedric Chan´s model, followed by the usual security notes and some useful hints for working with the materials. There is a parts list and some images of the parts showing their placement, it all being sufficient to build the model. The website mentions additional recommended PE parts such as watertight doors, inclined ladders, hatches and cable reels. Including this hint into the printed instructions would have been helpful, even though most modelers building a kit like this would not need it, but just consult their spare PE for the needed items. In the end, everybody will probably build their own customized version of this vessel, with all the PE and other additions looking useful to everyone.
 
Conclusions:
 
This is a very helpful kit of a subject well suited to improve a diorama, offering good value for money and one of the best levels of quality found amongst naval resin manufacturers. Highly recommended, be it OOB or however converted!
 
Building the kit
 
I wasn´t entirely happy with the vessel in her original configuration. There were certain aspects that didn´t look right to me, so I leafed through ship images and decided how to convert my model. I assumed that my ship started her life as a river barge, was taken up from trade and converted with workshop spaces, retaining some of her cargo holds. So I made the superstructure a bit more conventional by moving the funnel aft, using the resin wafer as part of the superstructure. The lower row of windows at the pilot house was removed, and an open bridge was added from paper and PE railings. Vents were added from solder. Cargo hatches were placed ahead and astern the workshop, and the rather small and ineffectually looking crane was deleted. Instead I added a tripod mast with a derrick to the bow.
Building the vessel was a breeze, due to the excellent resin and the conversion-friendly kit design. Portholes were drilled with small drill bits, for watertight doors and inclined ladders WEM PE was used (Askold and HMS Tiger PE sets being excellent for that purpose). Some PE from L´Arsénal (Structural Parts #1 and 2) was used, too. For the masts, conically turned brass from BMK and .2 mm brass from kotol.de was used. The canvas dodgers around the bridge were simulated by covering the PE railings with white glue.
Pretty soon, the parts were ready for painting. I used Revell Aqua Color #57 for vertical surfaces and Vallejo London Grey for the horizontal surfaces. The wooden deck was painted Vallejo Buff. A wash from Humbrol thinners and siena and black artist´s oil paints enhanced details, plus some gentle drybrushing at the edges. The windows were carefully painted using dark blue Vallejo Model Air and a very fine brush. The naigation lights were made from small pieces of solder. The boat and the float are resin parts from the kit.
The model was rigged using stretched tan sprue, Caenis ultrafine flyfishing thread and somewhat stronger flyfishing thread (both from UNI, Canada). This thread is much stronger than stretched sprue and can also be tightened using heat.
 
Conclusion:
 
An excellent small kit, useful for a plethora of military and civilian models!